CODESYS EtherNet/IP Adapter SL

CODESYS EtherNet/IP Adapter SL

€100

The CODESYS EtherNet/IP Adapter is an add-on for CODESYS compatible PLCs. By means of standard Ethernet ports, these devices are converted into EtherNet/IP adapters. The bus is configured directly from within the CODESYS Development System. Devices that are configured in this way exchange Ethernet messages with interconnected EtherNet/IP scanners.

Price shown in EUR as listed by the CODESYS Store. GST and applicable charges are additional. Final pricing will be confirmed in the official quotation.
Request QuoteView original product details ↗
SKU: 2303000006-F Categories: ,

Description

A specific EtherNet/IP configurator is already integrated in the standard setup of the CODESYS Development System. To use this, the user requires a license, which is either already stored in the target system 1 or can be added later 2. In addition, a protocol stack is required for implementing the EtherNet/IP communication on the configured Ethernet port. This stack is supplied with the license as a CODESYS library.

If the CODESYS EtherNet/IP Adapter is licensed on the device to be programmed, then it can communicate with connected scanners and operate EtherNet/IP modules. All parameters for communication are predefined in the configurator. An adapter-EDS-file is included in the standard delivery.

Configurator

Editors

  • Ethernet Bus Editor

  • EtherNet/IP Adapter Editor

  • EtherNet/IP Module Editor

Communication Settings

  • IP Address

  • Device Identification (Vendor ID, Product Code, …)

  • I/O Data Data Layout (module configuration)

Creation of custom assembly layout

supported

Valdidation of configuration

supported

Diagnosis

  • Display of device state

  • Display of connection errors on status page

EDS Export

Export of an EDS file suitable for the configuration.

IEC Stack

Supported Platforms

  • 32/64 bit

  • Little/Big Endian

Specification

CIP Networks Library Volume 1 and 2

max. Number of Connections

no restriction

max. Number of Input/Output Assemblies
No restriction;
The supplied EDS files support only one Input and Output Assembly by default.
But this can be extended by creating own corresponding EDS files.
In this way, I/Os can be distributed over several Assemblies/Connections.

Configuration Assembly

not supported

Connection Types

  • Class 1 (I/O Messaging)

  • Class 3 (Explicit Messaging)

  • UCMM

I/O Connection Types

  • Point to Point and Multicast

  • Cyclic Transmission

  • Exclusive Owner, Listen Only, Input Only

  • Tag based connections (one Tag per connection)

Minimal RPI

1 ms

Supported Objects

  • Identity Object (16#1)

  • Message Router Object (16#2)

  • Assembly Object (16#4)

  • Connection Manager Object (16#6)

  • QoS Objekt (16#48)

  • TCP/IP Interface Object (16#F5)

  • EtherNet Link Object (16#F6)

  • LLDP Management Object (16#109)

Large ForwardOpen

supported

LLDP

only transmission supported

CIP Motion

not supported

CIP Sync

not supported

Device Level Ring (DLR)

not supported

ACD

supported, deactivated by default

Conformance
tested with CT22 test tool and CODESYS EtherNet/IP V4.9.0.0 on:
CODESYS Control for Raspberry Pi SL V4.19.0.0 and CODESYS Control RTE 3.5.22.0

API

Diagnosis

  • State and Diagnosis variables

  • Ethernet Status Informationen

  • Generic Device Diagnose

Reconfigure

supported

other functionalities

  • Reset of adapter

  • Registration of own CIP Objects
1

Device manufacturers can equip their products with CODESYS EtherNet/IP Adapter and license them in advance. The use license is already included in SoftPLC systems from 3S-Smart Software Solutions (for example, CODESYS Control Win and CODESYS Control for Raspberry Pi).

2

End users can extend single, compatible devices with CODESYS EtherNet/IP Adapter SL. The license is saved on a special device dongle (CODESYS Key) or software license container (Soft Key) on the device.

Related products